:: ISOLMANT - Isolmant Fascia Perimetrale Tecnica non Reticolata ::

Adhesive polyethylene foam strips, hot pre-folded for easier L-shaped folding and silk-screen printed with installation instructions. Available in three versions:
- h 18.5 cm of which 11 cm on the wall + 7.5 cm on the floor;
- h 25 cm of which 18 cm on the wall + 7 cm on the floor;

In order to guarantee the efficient performance of the floating floor, it is also essential to insulate the vertical surfaces of the cement screed. To do this without having to “return” the anti-impact noise mat to the wall, which often proves a difficult job at the construction site, simply apply Isolmant Fascia Perimetrale to the foot of the wall and along the entire perimeter of the room. These three versions enable an excellent acoustic performance to be obtained with practical, safeand simple installation.

THICKNESS
Approx. 5 mm.

SOUNDPROOFING
Not using Isolmant Fascia Perimetrale causes an acoustic bridge to be formed, which may result in the loss of many decibels.

METHODS OF USE:
• After stripping the adhesive part of Isolmant Fascia Perimetrale using the hot pre-folded line, install approx. 7 cm under the floor (or on the laid mat) and the remainder on the wall.
• The excess part of the perimeter strip should be trimmed with a cutter after the final floor finish has been laid and grouted.

FORMAT
Strips at 12.5/18.5/25 cm x 50 linear meters